Ubuntu spanish keyboard wrong layout


It has just happened to me that suddenly the keyboard lost its setup. The keyboard has in  a button the 6 and &, symbols, but with this issue the / character was printed instead. In addition, the ^ character in the right, using AltGr didn't appear. Additional keys were missing and others in other settings. To solve this state the following command is the key:

 sudo dpkg-reconfigure keyboard-configuration

In the options I selected the standard 104 keyboard, and included dead tilde. This is your path.

Comentarios

Publicar un comentario

Entradas populares de este blog

Citrix - Xenserver - Migrate MAC address

Imagen
This post provides two scripts based on the shell of linux to export basic network information of your XenServer's virtual machines (VMs) , this will include the VM 's name, the device number, the MAC address and the network name of all the virtual interfaces (VIFs) of every VM of your pool, it has to be known that this software only works fine when the name of you VM s and the name of your networks have no spaces in between neither leading spaces, so rename this paramenters before using the scripts. Why should you like to save this information? In the following scenario: There are 2 sites in your company, one of them are the principal one, there you have provisioned VM 's with DHCP reserved to their MAC addresses, the alternate site is a recovery site, where you have to make work your VMs if the main site fails, as a requirement you have to have: Repplication LUNs from one site to the other, the VM 's disks have to be in a shared Storage Repository (SR) , the
Leer más

Configure SNMP for Citrix - XenServer

Imagen
Enable snmpd service 1. To enable snmpd service run the following command: # chkconfig snmpd on 2. Start the snmpd service: # service snmpd start Change SNMP configuration 1. To change snmp configuration edit the /etc/snmp/snmpd.conf file. 2. Restart the snmpd service: # service snmpd restart SNMP configuration examples Default settings You can view only systemview subtree .1.3.6.1.2.1.1 View whole subtree 1. Change lines as follows: Current lines: view     systemview     included     .1.2.6.1.2.1.1 view     systemview     included     .1.3.6.1.2.1.25.1.1 Add line: view     all          included     .1 Change line: access     notConfigGroup “”     any     noauth     exact     systemview     none      none To: access     notConfigGroup “”     any     noauth     exact     all          none      none 2. Save the file. 3. Restart the service: # service snmpd restart Change community string (default is “public”) Change line: com2sec notConfigUser     defa
Leer más

Xencenter on GNU/Linux

In this publication will be present the steps to install Xencenter on Linux. Software used: Ubuntu 16.04.1 LTS (To see this use the comand lsb_release -a ) PlayOnLinux 4.2.10 XenCenter version 6.5 (build 6.5.2.2477) 32-bit As may be seen the way to do it is by using playonlinux, for which the way to install it is: sudo apt-get install playonlinux Once installed playonlinux, select Install, Install a non-listed program, after this select Install a program in a new Virtual Drive. When you be asked What would you like to do before installation , select the three checkboxes. When you be asked to configure a version of wine to use, you can choose 1.7.37 or 1.9.17 (Tested). In the popped up windows for wine configuration check that the Windows version box is set on Windows XP. Select a 32-bit installation. In the component installation select the following components (They appear in that order): POL_install_dotnet40 POL_Install_ie8 POL_Install_tahoma2 During the n
Leer más